Tuesday, December 27, 2011

7 More Maintenance Tips for Water Heaters

!±8± 7 More Maintenance Tips for Water Heaters

Maintenance Tip #1 - Preparing the water heater. Turn off the power if its an electric water heater. Turn off the water to the water heater by closing the valve on the cold water line. Its located on top of the water heater. The cold line is always to the right. Open a hot water tap inside the house. Air pressure will come out of the tap. Open the drain valve located at the bottom of the water heater. It looks like a hose bibb. Let a gallon or more out of the water heater. Do not allow anyone to use hot water for the time you are working on the water heater.

Maintenance Tip #2 - Overhead clearance. Anode rods are almost as tall as the water heater itself. More often than not the ceiling is too close to the top of the water heater to be able to pull the entire anode rod out. No matter, lift the anode rod up as far as you can. Check to see if their is any flaking on the surface or any of its core wire is exposed. If not, then you can reinstall the anode as is. Most of the anode rods problems occur at its top because that's where most of the hot water is. If you need to remove an anode rod. Bend it in the middle against the water heater's opening and pull it out. To put a new one in, simply bend it in the middle again and straighten it out at the opening. If the anode top is wobbly when you try to screw it in, pull it half way again and attempt to straighten it as much as possible. If the overhead clearance is less than 2 feet, buy a link-type anode rod. It has "sausage" links of metal attached together. Its very easy to install.

Maintenance Tip #3 - Choosing anodes and replacing anodes. There are three types of metals used to make anode rods. They are magnesium, aluminum, and zinc. If you have naturally soft water, you should install a magnesium anode. Aluminum is used when you have very hard water or water that is softened heavily with salts. Installing an aluminum anode after you discover your previous anode has deteriorated heavily is recommended. If you install a magnesium anode after finding a heavily deteriorated anode could cause a negative reaction in the water and cause pressure to release out of the households faucets. If you have to install an aluminum anode rod, avoid using the hot water to cook with. Modern science believes that aluminum in the water can cause Alzheimer's disease. Don't consume any hot water. Zinc anodes are rare to find already installed in a water heater. Zinc anodes are used to counteract the effects of sulfur smells in the water. Zinc anodes are only 10% actual zinc. The rest is aluminum. Do not consume or cook with a zinc anode any more than an aluminum one. If the rod bends easily in your hands, it is aluminum, if not it is magnesium. Anodes have a protective current of about two feet. Buy anode rods that are too tall for your water heater. Cut them down if you have to. Try to buy anodes that are more than 3 feet and 8 inches.

Maintenance Tip #4 - Add a second anode rod. If your water heater has an exposed hexagonal-shaped head on top of it, you can install another anode rod for more protection for the water heater. Provided the hex-head exists, unscrew the hot water outlet. It's the pipe on top of the water heater on the left. This is where you can install a combination anode rod. Make sure the anode rod has a brass nipple that is 2 to 6 inches long. Hire a plumber to do this or look for the information in my article on anode rods. Warning: Adding a second anode can be quite a task.

Maintenance Tip #5 - Removing sediment. There are three signs you have sediment buildup in your tank: A lower element burnout if you have an electric water heater, A lot of noise if you have a gas water heater, or a foul odor coming from both types of water heaters. If the sediment piles up high enough, the lower heating element in an electric water heater will be covered and unable to heat water. If your hot water suddenly starts to run out long before it used to and you have an electric water heater, then its probably sediment build-up. Gas water heaters get covered up by sediment down at the bottom where the flame heats the burner plate. Water gets covered by sediment and becomes superheated steam. This expansive steam releases pressure that sounds like a loud row happening inside. If you smell a sulfur odor coming from the water heater, that's due to sediment build-up which breeds foul smell bacteria inside of it. To rid yourself of these problems, install a curved dip tube. You can also have a plumber use a special expensive Muck-vac tool. Dissolving the sediment is another option. Also, if you have an electric water heater, you can use a shopvac to suck the sediment out through the lower heating element. The how-to of these approaches is just below this sentence.

Maintenance Tip #6 - Install a curved dip tube and flush the water heater. When you buy a water heater, it usually comes with a straight dip tube. The dip tube is the piece of plastic pipe inside your water heater that extends from the top of the water heater's cold water inlet to the bottom of the water heater. It's job is to get the coldest water near the bottom where it can be readily heated. Sediment forms at the bottom of the water heater and does not move at all except at the small portion of the water heater where the dip tube extends to at the bottom. The water coming out of the tube pushes the sediment away. Trying to wash the sediment out of the drain valve on the outside of the water heater is also impossible. Installing a curved dip tube where the bottom of the tube curves to a ninety degree angle, causes the bottom of the water heater to be swept by the incoming cold water.

Sediment is picked up and kept in suspension in the water. Opening the drain valve and letting cold water enter the water heater for 5 minutes can clear up a lot of sediment. Installing a curved dip tube starts by unscrewing the cold water nipple. It's the pipe on top of the water heater on the right hand side. Stick a curved handled set of pliers in the hole of the cold water inlet and twist the dip tube up and out of the water heater. Get the dip tube high enough and you can pull it out by hand. If this doesn't work and the hole is rusty, scrape the rust away first. Take the new curved dip tube and mark it at the top on the side that the curve points. Wrap the top of the curved dip tube where you will be screwing it in at the top with teflon tape about eight times. Insert the curved dip tube and point it so that water will swirl along the side of the water heater. Also point it the direction going away from the drain valve. The drain valve is located on the outside of the water heater at the bottom. Make sure it is fully open when draining the water heater. If you use another method to clean the sediment out of your water heater, you should still install a curved dip tube. Optimum flushing should be done every six months or even more often.

Maintenance Tip # 7 - Removing sediment with a muck vac. Hire a plumber to use this tool to remove the sediment from your water heater. The tool is expensive and takes some knowledge on how to use. This is the most hands off method to remove sediment there is.


7 More Maintenance Tips for Water Heaters

Boppy Bouncer Pink Buy Online Saving Free Online Scientific Graphing Calculator

Monday, December 12, 2011

Honeywell HZ-385BP Safety Sentinel Electronic Ceramic Tower Heater

!±8± Honeywell HZ-385BP Safety Sentinel Electronic Ceramic Tower Heater

Brand : Honeywell | Rate : | Price : $77.00
Post Date : Dec 12, 2011 09:12:06 | Usually ships in 24 hours

Honeywell HZ-385BP Safety Sentinel Electronic Ceramic Tower Heater with Safety Sensor Infra-red Technology sense when objects are too close.

  • New Electronic Controls - Easy-Touch, turn and set
  • Adjustable electronic thermostat with Timer Function for 1, 2, 4 or 8 Hr Auto Shut-off
  • Illuminated power strip clearly indicates heater is ON and SafeGuard Alert Badge
  • Two Heat Settings / 1500 Watts
  • 3 Year Warranty

Recumbent Exercise Bikes Ratings Coupon Comparison Kitchenaid Mixer Refurbished Promo Bumbo Chair

Thursday, November 24, 2011

Lasko 751320 Ceramic Tower Heater - Space Heater Review

!±8± Lasko 751320 Ceramic Tower Heater - Space Heater Review

The Lasko 751320 Ceramic Tower Heater will provide your family with an ideal space heating solution for any room in your home. The unit weighs about 9 pounds, stands about 2 feet tall, and has a width of almost 9 inches. Though it is a relatively small heating unit, it provides complete whole-room heat without turning your home into a sauna. You can buy several units for your home, or move one unit around from room to room -- whichever method is more convenient.

The Lasko's Primary Features Include:

Widespread Oscillation
A Programmable Thermostat
Automatic Overheat Protection
A Remote Control with Batteries
Touch-Control Operation
A Convenient Carrying Handle
A 7 Hour Timer
and Several Quiet Comfort Settings

Unlike old space heater models. you will find that this unit is safe and modern; and that it provides even heating. It's elongated and sleek style will fit in with any home decor. In addition, the unit will not take up too much room.

Convenience

One of the features that you and your loved ones will enjoy the most is the remote control access device that is provided with the unit. Using your heater will be just as easy as cutting your television on and off. In addition, with remote control access, you will be more inclined to turn the unit off when it's not in use. You will be able to control your comfort at your fingertips.

Quiet Heating

This heater is perfect for office use because it is quiet, and it is not very distracting. You can feel free to use this heater in just about any room in your home.

The Lasko 751320 Ceramic Tower Heater provides you with, "safe ceramic warmth," that is evenly distributed, and that is not drying or harsh. The warmth provided by this unit will effectively heat your entire home quickly; and it will be hard to believe that such a small and quiet unit can be so effective.


Lasko 751320 Ceramic Tower Heater - Space Heater Review

Price Oakley Icon Backpack 2.0 Saving Yoder Canned Meat Lowest Price Sippin Syrup

Thursday, November 17, 2011

Ceramic Vs Carbon Infrared Saunas - Which One Better?

!±8± Ceramic Vs Carbon Infrared Saunas - Which One Better?

Before you decide to buy an infrared sauna for the size, style, and price, do not forget to check the resistance used. It can be difficult, the real differences between the ceramic and carbon infrared saunas say and even harder to judge what is best.

Infrared saunas are an innovative way to get all the benefits of a sauna, healthy and long term. Instead, sit in stifling hot air in a confined space of a traditional Finnish sauna or steam, infrared sauna uses infrared rays to help safely and effectively, participants in the work of a healthy sweat. Infrared is very similar to sunlight, naturally without the harmful UV rays.

There are many types of infrared sauna for those who want to enjoy their own purposes. Some public places such as spas and wellness centers are today the addition of infrared saunas, a traditional steam sauna. infrared saunas can be purchased on the Internet at home and stitched together. Home infrared saunas in different sizes, shapes and styles. They are equipped with different types of wood. Even the smaller portable models, simply fold the bike on the road and are now on the market. Which model is right for you is one of the most important factors for your infrared sauna house type heater.

Several infrared saunas are distributed with several thin, flat panels of carbon fibers at different locations in the sauna, infrared-equipped. Sometimes they are wrapped in fiberglass for protection and coverage. sheets of carbon are a bit "flexible and therefore less likely to break in the sauna of the house transit. Because of their broad, flat shape, are in a position with a large surface, which is important for an infrared sauna heater quality.

ceramic films, such as sheets of carbon fiber have a large surface and are incorporated into the inner walls of the sauna on all sides. The pottery is quite tricky, so carefully in the transport and handling of initial setup can be used in your sauna. Are you saying that, in general, more expensive heating carbon fiber, but argues that they should play far infrared radiation, while carbon fiber panels to produce heat to provide radiant heat and simple. This can cause sweating, but not for the same services as the soft tissues in the home.

It is important to know that some websites are sheets of carbon ceramic rods that are similar to comparing apples and oranges. Stems will be less efficient than plates or sheets, no matter what they did. Auctions have a smaller area and asked to perform a surface temperature higher, so they are worse than carbon and two ceramic plates. Remember, if the information on the heating elements carbon ceramic.

Now you're probably confused because the advantages and disadvantages of terrible, carbon fiber and ceramic-like. Although ceramics have (the ability to emit infrared rays) has a slightly higher emissivity, is not significantly higher than that of carbon paper. In general, ceramics are regarded as superior. But in fact the building material plays no role, and the surface temperature and the surface of a particular model of stove.

Of course, considerations such as budget and your sense of personal style, your decision to buy influence in the sauna in the house. But this should not be overlooked, given the nature of resistance. It is a very important decision and should not be underestimated.


Ceramic Vs Carbon Infrared Saunas - Which One Better?

Uses Of Manuka Honey Order Comparison Samsung Refrig

Friday, November 11, 2011

Best Whole Room Space Heaters

!±8± Best Whole Room Space Heaters

Many space heaters are advertised as "whole room heaters" - but exactly how big is a whole room? One possible answer can be found in the Vornado heater manual which describes a whole room, relative to the heater's capacity, as 16' x 16' with an 8' ceiling. These dimensions work out to 256 sq. ft. and 2048 cu. ft. respectively - easily the size of most family rooms, kitchens, or living/dining spaces.

Over the last year a major shift in space heater technology has re-shaped consumers' taste in whole room space heaters. Among the winners are those that employ ceramic or quartz infrared heating elements.

Among whole room heater manufacturers, Lasko holds the number two spot for bestselling heaters with its model 755320 tower heater with digital display (). (Number one is Lasko's 754200 compact heater ).

Ceramic heaters have gained wide spread popularity for a number of good reasons. One is reliability. Speaking from personal experience, our Lasko 5141, no longer available, refuses to give up the ghost after 6 or 7 birthdays - or approximately 52.4 space heater years.

A few more reasons behind the popularity of ceramics for heating are quick heat-up and safe operation. Ceramic heaters are also relatively quiet and produce an even heat which is often described as "soft."

Radiator Space Heaters
A radiator will always be a radiator so there isn't much you can do with it. Despite the lack of any game changing technology, the radiator type heater remains one of the safest. Among radiator heater makers, Delonghi dominates the market with its model D0715T Safe Heat Oil-Filled Radiator ().

Micathermic Heaters
Micathermic heaters are basically radiator heaters enclosed by mica panels for enhanced heat distribution. Since they depend on convection for heat distribution they are fan-less and noise-free. Designed for versatility, they can be mounted on casters or hung on a wall, and are said to be a good bathroom heater - which I don't recommend for any portable electric heater.

Once all the rage, micathermic heaters have all but fallen by the wayside. Maybe it had something to do with a customer complaining about sparks shooting from his DeLonghi HHP1500 Mica Panel Radiator. So it's interesting to note that the Kenwood HHP 1500, also made by Delonghi and strongly resembling the original, is one of Consumer Reports' highest rated heaters.

However, all is not lost. The Bionaire BH3950-U micathermic heater () rates 4 out of 5 stars from its users for silent operation, portability, and whole room, non-drying heat.

Convection Heaters With Fans
Fan-forced convection heat is the M.O. of most whole room space heaters. The top rated heater makers in this category are Lasko and Delonghi, mentioned previously, along with Holmes, Honeywell, and Vornado.

New from Vornado this heating season is the PVH, or Panel Vortex Heater (). This heater is a departure both in price and design from Vornado's most popular heater, the round cornered EH1-0034-06 AVH2 Vortex Full-Room Electric Heater (). The new, easy to operate flat panel design houses the same technology used in their more expensive models.

The secret to harnessing Vornado's vortex of heat is to locate the heater at one end of the room with a clear path to the opposite wall. When the air hits the opposing wall it splits and is deflected back around the perimeter of the room to heat every square inch of space.

From Holmes, sold under the Patton brand name, is the new PQH307-UM Tower Quartz Heater with Adjustable Thermostat (). This fan equipped unit is on the smaller end (150 sq. ft.) of whole room heaters and offers two heat settings corresponding to the number of quartz tubes turned on.

This year Honeywell has the distinction of a recommendation from Consumer Reports for its model HZ-817 Electric Convection Heater (). The 30" long, baseboard type heater has no fan and relies solely on convection for heat distribution.

Unfortunately, this heater is a victim of its own success and is either unavailable, back ordered, or sold at highly inflated prices resulting from scarce supply. Kaz USA Inc., the manufacturer of Honeywell, is aware of the problem and suggests the HZ-617 Whole Room 2-in-1 Heater () as an alternative. The main difference is the addition of a fan to the HZ-617 which can be turned on or off at your pleasure.

Without a doubt, the biggest shift in consumer preferences for electric space heaters has been to furniture style quartz infrared heaters. The introduction of EdenPure a few years ago was followed by an onslaught of competing makes and models.

Infrared Quartz Heaters
The newest of these is the Dr Heater infrared heater. Dr Heater features a dual quartz/ceramic heating system, gets food reviews, and costs 0 - 0 less than its competitors.

Finding the best whole room space heater is easy once you know the size of the space you want to heat, how fast you want it heated (heaters w/fans are 3x faster), and your budget.


Best Whole Room Space Heaters

Stiel Chain Saw Top Quality Oakley Dartboard Buy Online Sharp Lc32d47ut Order Now


Twitter Facebook Flickr RSS



Fran�ais Deutsch Italiano Portugu�s
Espa�ol ??? ??? ?????







Sponsor Links